Staining your deck is no easy chore. Many homeowners tackle a project of this magnitude without the full knowledge it takes to restore a deck the proper way.

Before you dive in and try to stain your deck yourself, you may have a few questions about Deck Staining St. Louis.

The biggest mistake we see as a pressure washing St. Louis company is homeowners believe they can just stain over the top of their existing deck stain. While this is true in some situations, you must be careful preparing your deck for deck staining St. Louis. If your deck is peeling, chances are you have a latex based deck stain on your deck. If the deck stain was applied over another deck stain, the deck was not prepped correctly. Also, one must understand that latex based deck stains do not penetrate into the wood. Latex based deck stains just lie on top of the wood, not offering much protection at all.

If your deck stain shows signs of fading, then chances are you have an oil based deck stain. Oil based deck stains are much better for St. Louis Deck Staining, because oil based deck stains penetrate into the wood, protecting cedar decks much better than latex based stains.

When homeowners are applying deck stain, they have a tendency to over apply the stain thinking the finish will last longer. It will do more harm than good.

Deck Stains need to be able to breath to dry properly on the wood surface. By over applying the deck stain, you a restricting the deck stain to dry properly, resulting in your deck finish failing much quicker by peeling or cracking.

When applying deck stains, give your deck one good coat of deck stain. Let the oil based stain naturally absorb into the wood. If it absorbs quickly, than the wood is thirsty and needs more deck stain. Generally as a Deck Staining St. Louis Company, we put no more than two coats on horizontal wood surfaces.

Yes you can, but you will be replacing the wood as well. For example, when Restoring A Cedar Deck St. Louisyou must be careful not to use too much pressure. Cedar is a soft wood, and with the right cleaners and detergents, you could remove the existing finish off of cedar with around 500-800 psi.

Too many times when we go out to do St. Louis Deck Staining, we see gouges in the wood where they have used too much pressure trying to clean their deck. When doing Cedar Restoration St. Louis, it is crucial to use low pressure when removing dirt, mold, mildew, and failing stain finishes.

Comments (0)

Show/hide comments

Show/hide comment form

Name

Email

Title

Comment

smaller | bigger

Subscribe via email (registered users only)

I have read and agree to the Terms of Usage.

Write the displayed characters

Add Comment